Mattel factory inspection on-site guidance and training

Mattel factory inspection on-site guidance and training

Mattel factory inspection on-site guidance and training

•Are fire extinguishers sufficient and easily accessible?
Sufficient fire extinguishing equipment ¨ Fire extinguishers should be installed no lower than 1 meter from the work floor, but no higher than 1.4 meters ¨ Fire extinguishers should not weigh more than 11.3 kg ¨ In areas with flammable liquids, the distance between extinguishers should not exceed 15 meters ¨ In areas without flammable liquids, such as offices, the distance between extinguishers should not exceed 23 meters Fire extinguishers are suitable for specific materials ¨ Dry powder extinguishers - for most occasions ¨ Halon extinguishers - for expensive electrical equipment ¨ Water extinguishers - for Class A fires (ordinary burning materials)
¨ Carbon dioxide type fire extinguishers - Inspection of fire extinguishing equipment for Class B and Class C fires (caused by flammable liquids and electrical appliances) ¨ Check and estimate weight ¨ Check latches and seals ¨ Weigh carbon dioxide fire extinguishers every 6 months ¨ Have portable fire extinguishers been refilled within a year?
¨Are any portable fire extinguishers damaged, unusable or lost?
•Are emergency evacuation drills conducted and recorded for each shift each year (including dormitories)?
In places where the staff turnover is greater than 30%, emergency evacuation drills should be conducted twice a year. In places without fire sprinkler systems, all employees should be evacuated within 5 minutes, while in places with fire sprinkler systems, the time can be extended to 10 minutes.
•Is the factory equipped with a fire alarm system?
Fire alarms can be heard throughout the factory. Fire alarms must be installed in the factory buildings and dormitories. The system can be evenly distributed manually and can be used at any time.
•Are emergency exits clear and at least 91 cm (36 inches) wide?
Emergency exits are unobstructed. No objects should be stored against or under fire doors at any time.

•Are the labels on the emergency exit doors visible from a distance of 31 meters (100 feet)?
•Are emergency exits in the factory and dormitories locked?
Emergency exit doors cannot be locked with locks, clasps, chains, bolts or other locking devices. Emergency exit doors can be easily opened from the direction of escape, and no special knowledge or skills are required.

<<:  Mattel Factory Inspection Documents List

>>:  Mattel Factory Inspection/Factory Health Special

Recommend

eBay Releases New Mandatory Standard for Coin Cell Batteries

On July 14, eBay's official website released ...

The difference between organic cotton and pure cotton

Many people cannot distinguish between organic co...

eBay overseas warehouse access rules in 2020~

eBay overseas warehouse access rules and regulati...

What should customers pay attention to when inspecting the factory?

What are the things that customers need to pay at...

What is Ifttt? What are the advantages and applications of ifttt?

Ifttt is the abbreviation of "if this then t...

WRAP certification official website system upgrade

According to the official notice issued by WRAP, f...

What is Sunvalley? What brands does Sunvalley have?

Founded in 2007, Sunvalley Group has grown into a...

Facebook registration process analysis ~

Facebook Profile: Facebook (Chinese translation: ...

What are the key factors in eBay’s anti-account association operations?

1. In the registration information of eBay accoun...

Timberland Timberland factory audit project

Timberland Timberland factory audit project 1. Chi...

What is Joybuy? What are the common problems with Joybuy?

What is Joybuy? Joybuy.com, operated by Chinese e...

Walmart found 11 high-risk violations during factory inspection

1. There are no personnel records or other recrui...